2500 KW
NEW
DIESEL
AES-C2500
Manufacturer CUMMINS
Model C1500D6E - QSK38
Year 2026
Condition New
Serial Number TBD
Stock Number AES-C1500KW1500
Hours NEW
Fuel Type DIESEL
Amperage 2255
Application STANDBY
STATIONARY Duty
STANDBY RPM1800
Voltage277 / 480V
Emissions Rating EPA TIER 2 - STATIONARY EMERGENCY
Width 126in Height 159in Length 329in Weight 52000 lbs
The new Cummins C1500D6E stationary generator set delivers 1500 kW standby power and 1364 kW prime power using a Cummins QSK38 NR2 engine with a 2220 HP rating at 1800 RPM. It meets EPA Tier 2 emissions standards and features a 3-phase, 60 Hz operation with a 277/480V non-reconnectable voltage setup. This model is equipped with a 2500 Amp main-line circuit breaker, a PMG permanent magnet generator, and a PowerCommand 3.3 digital control panel for advanced management capabilities.
Notable features include an EnerGenius battery charger and dual coolant heaters, supporting efficient performance. The unit comes with a sound attenuated enclosure for reduced noise levels and a 200 Amp load center with GFCI duplex outlets. Additionally, the large 2750-gallon UL142 sub-base fuel tank provides secondary containment, ensuring safety and compliance. However, batteries and initial startup are not included, and its warranty covers 3 years or 1000 hours of operation.
This unit is UL 2200 listed and holds IBC seismic certification, emphasizing its reliability and safety. With its comprehensive features and robust design, it suits various standby power applications. The generator set measures 126 inches in width, 329 inches in length, and 159 inches in height, supporting a weight of 52,000 lbs, ensuring a heavy-duty build for industrial use.
2500 KW
NEW
DIESEL
AES-C2500
Manufacturer CUMMINS
Model C1500D6E - QSK38
Year 2026
Condition New
Serial Number TBD
Stock Number AES-C1500KW1500
Hours NEW
Fuel Type DIESEL
Amperage 2255
Application STANDBY
STATIONARY Duty
STANDBY RPM1800
Voltage277 / 480V
Emissions Rating EPA TIER 2 - STATIONARY EMERGENCY
Width 126in Height 159in Length 329in Weight 52000 lbs
The new Cummins C1500D6E stationary generator set delivers 1500 kW standby power and 1364 kW prime power using a Cummins QSK38 NR2 engine with a 2220 HP rating at 1800 RPM. It meets EPA Tier 2 emissions standards and features a 3-phase, 60 Hz operation with a 277/480V non-reconnectable voltage setup. This model is equipped with a 2500 Amp main-line circuit breaker, a PMG permanent magnet generator, and a PowerCommand 3.3 digital control panel for advanced management capabilities.
Notable features include an EnerGenius battery charger and dual coolant heaters, supporting efficient performance. The unit comes with a sound attenuated enclosure for reduced noise levels and a 200 Amp load center with GFCI duplex outlets. Additionally, the large 2750-gallon UL142 sub-base fuel tank provides secondary containment, ensuring safety and compliance. However, batteries and initial startup are not included, and its warranty covers 3 years or 1000 hours of operation.
This unit is UL 2200 listed and holds IBC seismic certification, emphasizing its reliability and safety. With its comprehensive features and robust design, it suits various standby power applications. The generator set measures 126 inches in width, 329 inches in length, and 159 inches in height, supporting a weight of 52,000 lbs, ensuring a heavy-duty build for industrial use.
